Modified on: Tue, 25 Jun, 2019 at 5:43 PM
This video will show you how to program the Honeywell 5834-4 wireless key transmitter arm stay button into the Honeywell LYNX Plus L3000 wireless security system. To program the Honeywell 5834-4 from the home screen select 4112 800, *56, *, select available zone that pertains to the particular key transmitter you are using, arm stay is zone 26 in this application, *, zone type 21, *, 0, button type is 5, loop e3, press arm away button two times to learn in serial number, *, verify serial number, *, change zone description if needed, *, 00 * 99 to exit programming. Make sure to call GEOARM Security to test your Honeywell 5834-4 to make sure it is being used correctly.
By adding the Honeywell 5834-4 wireless key transmitter to your Honeywell LYNX Plus L3000 wireless security system's programming you unlock some convenient features. The Honeywell 5834-4 features four buttons that can be programmed for individual control or can be paired for 2 button controls, which allows for 8 functions for multiple applications like arming, disarming, panics and more. The Honeywell 5834-4 comes programmed in high-security mode for an added layer of protection against cyber-attacks. The triple LED function gives indication that a signal was sent when the user selects a function, indicates if the wireless key is in high-security or normal mode, and notifies you of the battery status. The Honeywell 5834-4 wireless key transmitter buttons are recessed and include easy understanding icons to help alleviate false alarms.
For the lowest No-Term alarm monitoring rates contact GEOARM Security 1-877-443-6276
Honeywell LYNX Plus L3000 Frequently Asked Questions
Alarm Monitoring: http://bit.ly/geoarmmonitoring
Geoarm Security Blog: http://bit.ly/DIYSECURITYBLOG
Honeywell L3000: http://bit.ly/LYNXL3000
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.
Do You Have any Discussion Questions?
comments powered by Disqus