This video will show you how to install the Honeywell GSMVLP-4G cellular communicator into the Honeywell LYNX Plus L3000 wireless security system. The first thing that you want to do is remove the Honeywell GSMVLP-4G and remove it from its packaging box. Inside the packaging box you will also find a white connecting wiring harness. Make sure that you select the correct white wiring harness based on the revision number of your Honeywell LYNX Plus system. Now you want to turn the Honeywell L3000 on its side and depress the two tabs at the top. Make sure to power down the system before installing the Honeywell GSMVLP-4G. Notice on the top right of the Honeywell L3000 back mounting plate there is an area where the Honeywell GSMVLP-4G should line up with the three screw terminals. Once the three screws have been secured you now want to use the correct white wiring harness to connect the Honeywell GSMVLP-4G to the Honeywell L3000 wireless security system. Write down the MAC and MAC CRC serial numbers so that we can activate your cellular alarm monitoring services. Now you can power up the Honeywell L3000 wireless system and seal it. 

Honeywell's IntelliPath series communicators provide reliable coverage by automatically choosing the best signal in the area whether 2G, 3G or 4G and self-adjusting as necessary. The following wireless communication protocols are supported: HSPA+ (4G) HSPA (HSDPA & HSUPA) (3G) EDGE (2G) GPRS (2G). This communicator provides full data reporting and uploading/downloading with most Honeywell control panels.

When deciding to add the Honeywell GSMVLP-4G cellular communicator you will have access to key features on the LYNX Plus wireless security systems. When activating the Honeywell GSMVLP-4G you will have the availability to have Honeywell’s AlarmNet Total Connect 2.0 interactive alarm monitoring services. This is where you can remotely control your security system from a smart device. Features such as, arm/disarm; receive notifications, control user profiles and user codes. The Total Connect application is quite extensive as far as how custom you can make it. You can control what notifications you want to receive and also what notifications you would not like to receive.

The Honeywell GSMVLP-4G cellular communicator is probably the most important addition to your Honeywell L3000 wireless security system that you can have. The reason being is when you decide to go with a Phone line you run the risk of having your security system rendered if the power or phone cables are cut from the outside of the location. When you add the Honeywell GSMVLP-4G cellular communicator to your alarm system it can be powered off of the alarm back up battery for 4-6 hours even if the power goes out or someone cuts the phone line or internet cables. You can even add a higher capacity backup battery to your system giving it up to 24 hours of backup battery time giving you even more protection.

For the lowest No-Term alarm monitoring rates contact GEOARM Security 1-877-443-6276

Honeywell LYNX Plus L3000 Frequently Asked Questions 



Alarm Monitoring:

Geoarm Security Blog:

Honeywell L3000: